fbpx

Battery Compression Lug for 2 AWG Wire c/w Clear Heat Shrink Sleeve

CAD $2.69

Panduit Battery Compression Lugs provide high quality
termination for Heavy Duty power connector applications.

SKU: PAND-A2 Category: Tag:

Description

Our Battery Compression Lug for 2 AWG high conductivity tin plated copper lugs, tin plated to meet ASTM Class C specification for corrosion resistance.

When installed by Golden Channels at time of order with wire of the specified AWG wire size, these lugs meet military pullout strength specifications.

UL Listed for use in the U.S. and Canada to UL 486A-486B
standard for power applications.

Each lug is supplied with a 2″ clear heat shrink tube section.

Here are some common screw terminal sizes.  Please check to make certain the hole size is correct prior to ordering:

Deep Cycle Lead Acid Series 27 through Series 31 batteries mostly come in 5/16″ screw terminals.  Occasionally, you will find 1/4″ terminals, and 1/4″ terminals are more common in lead acid batteries as their capacity is smaller.

Newer Lithium Ion Batteries are almost all M8 screw down type terminals.  However, some battery makers offer an M6 screw down terminal as an option.  You should check which one you need.  The lugs are identical for 1/4″ and M6, since hole sizes only vary by 20 thou.  Same rule applies for 5/16″ and M8.

Additional information

Post Stud Size

1/4" (M6), 5/16" (M8), 3/8", 1/2"

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.